sepster
User
Junior Poster
| Posts: 8 |   |
|
Re:Considering DIY'ing a Brivis Ducted Heater - 2007/09/22 17:00
Hi Cyril,
OK yes, I'll run the full six meter length of duct for return air. Saves a cut!
Does most of the noise travel up the duct?
Would it also be worth putting in some accoustic insulation under the floor (above where the heater sits)?
The flue will need to go up into the wardrobe at least, to get above a solid cement patio (outside the wall the heater will be adjacent to). I could then punch out the back of the wardrobe wall and out onto the back corner of the patio, but I figured straight up from there would be more elegant (and less elbows). But it will probably be easier to go out through the wall so that's probably what'll end up happenning!
Cheers,
Ben.
|
